Faculty of Mechanical Engineering

Browse by

The academic departments of the university offer degree programs in different engineering, and science disciplines. All the departments except Dept. of Humanities have the postgraduate programs, while the departments of Civil Engineering, Electrical and Electronic Engineering,Mechanical Engineering, Computer Science and Engineering, Electronics Communication Engineering , Industrial Engineering and Management offer undergraduate degree programs.

For more information

Sub-communities within this community

Recent Submissions

Modeling to Integrate the International Standards with Total Quality Management Philosophy

Talapatra, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2021-01)

The aim of the present study is to develop an Integrated Management System (IMS) and its implementation framework for RMG industries of Bangladesh. RMG industries are using several management standards in their organizations ...
Recovery and Characterization of Fuel from Pyrolysis of Medical Wastes: An Alternative Source of Energy

Abedeen, Adnan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)

Bangladesh is a developing country and one of the most densely populated countries in the world. Energy consumption per capita of this country is also low compared to other developing nations. At present, the energy demands ...
Optimization of Investment Casting Parameters to Improve the Mechanical Properties by Taguchi Method

Mondal, Nil Ratan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)

In this present study investment casting process parameter is optimized by using Taguchi approach to improve the mechanical properties of mild steel. A set of experiments were conducted as per Taguchi's L9 orthogonal array ...
A Cross-sectional Study of Work-Related Musculoskeletal Disorders among Construction Workers in Bangladesh

Rahman, Md. Sumon (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)

The construction activities are closely associated with many occupational injuries. Work-related musculoskeletal disorders (WMSDs) are the most common occupational injuries faced by construction workers. WMSDs refer to a ...
Modeling and Analysis of Labour Cost Estimation for Ship Repairing: A Case Study in Chittagong Dry Dock Limited

Karim, Mohammad Sajedul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)

With the increase of international trade activities through sea and resulting exponential growth of number of ships calling on coastal nations’ ports, ship repair is becoming an increasingly attractive opportunity for ...
Development of an Optimal Inventory Management System in Khulna Shipyard Limited- A Case Study

Uzzaman, Md. Safiq (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)

Inventory, the key component of any organization is the stock of any goods or asset that are required for manufacturing or assembly of the product to maintain the plant. The fundamental function of an inventory system is ...
Wear Rate Comparison of Different Impeller Materials for Pumping Various Types of Slurry

Karmokar, Sandip (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)

Erosive wear can as defined as solid deduction process from a solid superficial due to frictional action between the slurry and surface. It is triggered by the effect of solid particles contains by slurry in contradiction ...
Development of a Model to Optimize the Supply Chain Management and it's Application

Amin, Md. Al (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)

The mam objective of this research is to develop a mathematical model for supply chain transportation costs. This model consider the real time data of the transportation cost incurring elements which helps in achieving ...
Prototype Development of a Joint Padded Metatarsal Cup to Enhance Female Foot Musculoskeletal Safety

Jor, Abu (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)

This study investigated the feasibility of joint padded metatarsal cup on plantar pressures and stress distribution in the bone alignment of female foot with high heeled footwear during balanced standing. The aim of this ...
Wear Rate Comparison of Different Impeller Materials for Pumping Various Types of Slurry

Karmokar, Sandip (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)

Erosive wear can as defined as solid deduction process from a solid superficial due to frictional action between the slurry and surface. It is triggered by the effect of solid particles contains by slurry in contradiction ...
Production of Liquid Fuel from Rice Husk and Sawdust

Islam, Md. Kamrul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)

Energy is the key input to economic growth of a nation and there is a close relation between accessibility of energy and escalation in the quality of nation. As conventional energy sources are limited and will diminish ...
Pyrolysis of Organic Waste: A Way to Solid Waste Management and Extraction of Fuel

Nipa, Farzana Yeasmin (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-06)

Bangladesh is a developing country and is one of the most densely populated countries in the world. Her per capital energy consumption is also low compared to others. At present, the energy demands are becoming more acute ...
Effect of Various Operating Parameters on Power Generation from Mediator Less Microbial Fuel Cell

Halim, Md. Abdul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)

Microbial fuel cell (MFC) is the most adaptable renewable energy technology for its multidimensional applications. This bioreactor converts the chemical energy stored in decomposable organic and inorganic compound into ...
Development of Strategic Fit Model of Manufacturing Unit for Garments Industry

Rahman, Md. Habibur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-04)

Though Bangladesh is one of the largest garments manufacturing country in the world and there happened revolutionary changes more than four decades ago, they couldn’t achieve sustainable platform yet. The failure to ...
Solving Multi-Objective Assignment Problem with Decision Maker’s Preferences by Using Genetic Algorithm

Rahman, Md. Mahbubur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-06)

The multi-objective assignment problem is basically the N men –N tasks problem, where a single task has to be assigned to an individual with a view of optimizing the outcomes. A common challenge is to address the conflicting ...
Evaluation of qualitative and quantitative techniques in decision-making: A Case Study

Pushpo, Faria Haque (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-12)

This paper represents a brief overview on the evaluation of qualitative and quantitative techniques in decision-making. The purpose of this study was to examine the status and extent to which administrators and engineers ...
A New Concept in Modern Industry Sector, “Virtual Industry Model”

Badiuzzaman, Md. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-12)

Virtual office has become a popular and desired office management system for technologybased low-cost office management system. This virtual management system is a new way of working that enables the virtual worker to ...
Development and Performance Evaluation of Storage Allocation Models in Warehouse

Islam, Md. Saiful (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-11)

Order picking is the most labor-intensive and costly operation in warehouse. Efficient storage assignment rules enormously affect the order picking efficiency. Warehouse managers are concerned about searching for the ...
Numerical Modeling on Solid Cone Nozzle without a Vane Swirler

Pervin, Mst. Shahin Akter (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2006-12)

The performance parameters like the coefficient of discharge Cd and the spray cone Angle W of a swirl spray solid cone nozzle without a vane swirler have been studied numerically. The numerical computation of flow through ...
Studies on Long Term Average Optical Efficiency for Principal Solar Collectors and Shading Factors for Windows

Rahman, A. N. M. Mizanur (Indian Institute of Technology (IIT), Kharagpur, India., 1997-09)

Assessment of techno-economic viabiity of solar energy systems is based on long term performance. The popular design methods for active as wel1 as passive solar energy systems require certain proprocessed parameters in ...

Faculty of Mechanical Engineering

Faculty of Mechanical Engineering

Browse by

Sub-communities within this community

Recent Submissions

Search KUET IR

Browse

All of KUET IR

This Community

My Account

Discover

Author

Subject

Date Issued

Has File(s)

Statistics

RSS Feeds